I want to try this right away in building a Raspberry Pi environment

The procedure for using the Raspbian image with the SSP library installed is as follows
(1) Download the following image.
https://www.centuryarks.com/images/product/sensor/2018-11-13-raspbian-stretch-CA378-AOIS.zip
(2) Follow the Raspbian installation guide.
https://www.raspberrypi.org/documentation/installation/installing-images/README.md
For manual installation, please refer to page 4 of the following instructions.
https://github.com/centuryarks/CA378-AOIS/tree/master/Raspi3"